Table of Contents
Advertisement
2.1.1
The Mother Board (MB)
The MB consists of the following features and parts:
Two USB Type-B receptacles
Jumpers
Switches
Optional External 5V power supply via X2 and X3
Quick Start Guide Rev. 1.0
o
USB0: Provides 5V power via USB and the command UART0
o
USB1: Data UART1 (Netcat, Webcat, UDP etc.)
o JP2, JP6 and JP7, Set power source
o JP5 UART0 (RX and TX)
o JP1 UART1 (RX, TX, CTS and RTS)
o S1: Factory Reset (if held for 10 seconds will invoke)
o S2: Not Connected
o S3: WAKE_UP0
o S4: WAKE_UP1
Figure 1: The Evaluation Kit Motherboard (MB)
PAN9420 Quick Start Guide
Page 7
Advertisement
Table of Contents
