Page 2
Command Specification available at our website: DS-CS-CommSpec-9320 For powering up the PAN9320ETU, you only have to connect the USB0 Port to your USB-Port at your development PC. The USB1 is connected to the Uart1 of the module and features its Netcat TCP-Data-Tunnel capability.
Page 3
REV. CLASSIFICATION Quick Start Guide DS-SG-QSG-9320ETU SUBJECT PAN9320ETU PAGE 3 of 5 CUSTOMER’S CODE PANASONIC’S CODE DATE PAN9320ETU PAN9320ETU 28.04.2015 Windows device manager hardware settings you have to figure out which one is the port for Uart0. To make it more comfortable you can install the following driver that gathers both FTDI ports to one virtual port.
Page 4
REV. CLASSIFICATION Quick Start Guide DS-SG-QSG-9320ETU SUBJECT PAN9320ETU PAGE 4 of 5 CUSTOMER’S CODE PANASONIC’S CODE DATE PAN9320ETU PAN9320ETU 28.04.2015 When you are asked to enter a password, please enter the default password: PAN_9320. Open your internet browser (i.e. Firefox). Enter the default IP-Address of the PAN9320 in the URL line: 192.168.1.1...