Pixel Counter; Recording - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
AAC audio technology is licensed by Fraunhofer IIS.
(http://www.iis.fraunhofer.de/amm/)
AAC bit rate
Select the required AAC bit rate.
4.4.14

Pixel Counter

The number of horizontal and vertical pixels covered by the highlighted area is displayed
below the picture. With these values you can check whether the requirements for specific
functions, for example, identification tasks, are fulfilled.
1.
2.
3.
4.5

Recording

Images can be recorded to an appropriately-configured iSCSI system or, for devices with the
appropriate storage slot, to a local media card such as a CompactFlash (CF) card.
Note: This is only required if the Transcoder is going to Manage the recordings. Otherwise, the
recording settings of the connected device will apply.
Images can be recorded to an appropriately configured iSCSI system or, for devices with an
SD slot, locally to an SD card.
SD cards are the ideal solution for shorter storage times and temporary recordings. They can
be used for local alarm recording or to improve the overall reliability of video recording.
For long-term authoritative images use an appropriately sized iSCSI system.
Two recording tracks are available (Recording 1 and Recording 2). The encoder streams and
profiles can be selected for each of these tracks for both standard and alarm recordings.
Ten recording profiles are available where these recording tracks can be defined differently.
These profiles are then used for building schedules.
A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system.
The VRM is an external program for configuring recording tasks for video servers.
With WiFi models the recording performance depends on the wireless transmission efficiency.
To avoid degradation for continuous recording with an iSCSI target storage device, it is
essential to use the Bosch Video Recording Manager or a DIVAR IP 2000 / DIVAR IP 3000 to
manage all recordings without interruption.
You can define up to ten different recording profiles. You will then use these recording profiles
in the recording scheduler, where they are linked with the individual days and times.
Notice!
i
You can change or add to the recording profile description on the tabs on the Recording
Scheduler page.
CF cards are the ideal solution for shorter storage times and temporary recordings, for
example alarm recordings or local buffering in the event of network interruptions.
For long-term, authoritative images, it is essential that you use an appropriately sized iSCSI
system.
Bosch Security Systems B.V.
Click Freeze to freeze the camera image if the object that you want to measure is moving.
To reposition a zone, place the cursor over the zone, hold down the mouse button and
drag into position.
To change the shape of a zone, place the cursor over the edge of the zone, hold down the
mouse button and drag the edge of the zone to the required position.
User Manual
Configuration | en 41
2022-12 | V01 | DOC