Lens Settings - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
Note: If you choose to hide all masks, you must enable each individual mask to show the mask
in the scene.
13. To display IVA behind privacy masks, click the IVA behind masks check box.
Notice!
i
Draw the mask at 50% optical zoom or less for improved masking performance.
Draw the mask 10% larger than the object to ensure that the mask completely covers the
object as the camera zooms in and out.
Notice!
i
The camera disables the Privacy Mask feature if the orientation of the camera is set to
Inverted. Refer to Installer Menu for orientation settings.
4.4.6

Lens Settings

Focus
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Day near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.
Night near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the night.
Iris
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
–
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Available only with Constant Iris mode.
Bosch Security Systems B.V.
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
– Gain Control: switches to AGC.
– Shutter Speed: switches to default.
Manual: camera must be manually adjusted to compensate for varying light conditions.
User Manual
Configuration | en 35
2022-12 | V01 | DOC