Table of Contents
Advertisement
28/80
CytroPac | Assembly
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
The following figure shows a schematic illustration of the installation plate:
Fig� 4: Installation plate (optional)
1 Clip
2 Locking mechanism
3 Tapped hole for hexagon socket head cap screw M6 x 430 mm
4 4 x ø9 through hole for hexagon socket head cap screw, e.g. M8 x 20 mm
To fix the hydraulic unit in place using the mounting kit, proceed as follows:
1� Bend the clip by 90° as illustrated Fig. 5.
2� Attach the edge protector provided to this clip.
1.
Fig� 5: Assembly steps 1 and 2
3� Place the installation plate in correct position on a level surface.
This defines the arrangement of the hydraulic power unit.
2.
1
2
3
4
Advertisement
Table of Contents
