Panasonic EBL512 G3 Planning Instructions page 75

Fire alarm system
Hide thumbs Also See for EBL512 G3:
Table of Contents

Advertisement

Panasonic Eco Solutions Nordic AB
MEW01472
Rev: -
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
Comments to the trigger conditions (functions):
1
Fire alarm.
United version 2.7.x Operating Instructions.
2
See 1.
3
See 1.
4
See 1.
5
Pre-warning.
United version 2.7.x Operating Instructions.
6
See 5.
7
See 5.
8
See 5.
9
Heavy smoke / heat alarm. For more information, see
EBL512 G3 United version 2.7.x Operating Instructions.
10
See 9.
11
See 9.
12
See 9.
13
One address (in two-address dependence) is in fire alarm
state. For more information, see EBL512 G3 United
version 2.7.x Operating Instructions.
14
One zone (in two-zone dependence) is in fire alarm state.
For more information, see EBL512 G3 United version
2.7.x Operating Instructions.
15
One or more interlocking inputs, in the specified
interlocking area, are activated.
16
The interlocking input, in the specified interlocking
area/point, is activated.
17
One or more interlocking inputs are activated.
18
One or more interlocking inputs, in the specified range,
are activated (from interlocking area no./point to
interlocking area no./point).
19
Routing equipment output (any Fire brigade tx output) is
65
activated.
20
Routing equipment output (Fault tx) is activated.
21
Routing equipment output (Fire brigade tx) is disabled.
22
The specified zone is disabled.
23
The specified alarm point (zone/address) is disabled.
24
One or more alarm points (zone/address) are disabled.
25
One or more faults are generated in the system.
64
The trigger condition is true as long as the pre-warning level is exceeded.
It is also true as long as the fire alarm level is exceeded even if the option
pre-warning detection is disabled (via Win512 version 2.7.x).
65
Indicated by LED "Fire brigade tx". Output can be tested via menu H1.
This trigger condition must not be used for type of output 4 = Routing
equipment (Fire brigade tx).
66
Indicated by LED "Fault tx activated". Output can be tested via menu H1.
67
Indicated by LED "Fault/Disablements Fire brigade tx".
For more information, see EBL512 G3
64
For more information, see EBL512 G3
73
66
67
70
68

Advertisement

Table of Contents
loading

Table of Contents