Port Security - GE JungleMUX SONET Technical Practice

Port Security

The set of available ports depends on how the two banks on the bottom
paddleboard are equipped with four-port modules. Note that the port labels for
those ports that are available but presently disabled are grayed out.
Off on Disconn(ect)
If checked, the port will become disabled upon loss of connection on
the local input.
Note: On the unit Version 3.00, this function cannot be enabled for
P-Trunk and Q-Trunk ports.
removed in one of the subsequent firmware releases.
Security Status
Indicates the current security status of the port. May display one of the
following "alert" messages (shown in priority order):
Disabled
Intruder
Disconnected A port previously disabled due to loss of cable
OK
Intrusion Detect
(Applicable to secured ports only.)
detection feature is enabled. See Intruder MAC field description for
more information.
Note: This field is configurable only if the port is enabled and its „MAC
Security‟ is set to „Secured‟. Otherwise, it‟s grayed out.
Intruder MAC
(Applicable to secured ports only.) If an unknown MAC address is
detected on a secured port with intrusion detection enabled, the MAC
address will be treated as an intruder MAC and it will be displayed in
Copyright  GE Multilin Inc. 2010-2012
It is expected that this limitation be
The port has been disabled because the cable
connection to the port has been lost (or was
temporarily lost) and Off on Disconn is checked. An
alarm is produced if Enable Alert is checked.
Presence of an intruder MAC address has been
detected on the port. (Applicable to secured ports
with Intrusion Detect checked.) An alarm to NMS is
sent only if Enable Alert is checked.
connection is now enabled but the cable connection
to the port has not been reestablished.
No security alerts for the port.
342-86400-498PS
Issue 1.2
April 2012
Page 90
If checked, the port‟s intrusion