Ethernet Interface - Bosch CL400 Manual

2- -6 Hardware
2.4

Ethernet Interface

Pin Assignment
The Ethernet is connected via a twisted pair cable with RJ45 connector. The
in IEEE 802.3 defined terminal conditions for 10Base-T are applicable:
D Network topology star
D Max. transmission rate: 10 Mbit/s
D Max. segment length: 100 m
D 100 Ω twisted pair cable
D Link monitoring
D Manchester-coded data transmission
D Connector style: eight-pin RJ-45
The line should have a cross section of 0.08 mm
ance, and 12 to 45 transpositions per meter. For this use, special cables,
called Shielded Twisted Pair (STP), are available:
D STP cable category 3
D STP cable category 4
D STP cable category 5
D STP cable category 6
Increasing category numbers correspond to better cable characteristics.
We recommend the use of STP cables category 5.
Pin No.
1
2
3
4
5
6
7
8
2
to 0.34 mm
Explanation
Tx+
Tx--
Rx+
free
free
Rx--
free
free
1070 072 196-101 (00.06) GB
2
, 100 Ω imped-