GE B30 Technical Reference Manual page 113

Problem
'Network board error'
message shows on the
monitor screen
Other Site View shows no
waveforms
Network printing fails
Cause
NET section on the CPU board
NET section memory on the
CPU board
No waveforms are set up for
Monitor-to-Monitor
communication
Print server is busy
Print queue is full
Printer is off-line
What to do
The NET section is defective. The board cannot
be used. See network service page for details.
The SRAM memory of the NET section is
defective or uninitialized. The board cannot be
used. See network service page for details.
Run Network Setup to verify current
Monitor-to-Monitor communication setup.
Network manager's print server is busy at the
moment and cannot take more print jobs. Try
again after 15 seconds.
There are too many unprinted documents
waiting in the print queue. Check the printer, as
it is not operating properly.
Printer cable is loose, printer is out of paper,
there is a paper jam or the printer is simply
switched to off-line state.
Frame troubleshooting
4-7
Document no. 2044677-001