Dynamic ARP Inspection Information
© Copyright Lenovo 2017
The following commands display Dynamic ARP Inspection (DAI) information:
Table 44.
Dynamic ARP Inspection Information Options
Command Syntax and Usage
show ip arp inspection
Displays the current DAI configuration settings.
Command mode: All
show ip arp inspection interfaces [<port alias or number>]
Displays the current DAI configuration settings for the selected interfaces.
Command mode: All
show ip arp inspection vlan [<VLAN ID (1‐4094)>]
Displays the current DAI configuration settings for the selected VLANs.
Command mode: All
show ip arp inspection interfaces [<port alias or number>]
Command mode: All
Interface Trust State
1 Trusted
2 Trusted
3 Untrusted
4 Untrusted
...
show ip arp inspection vlan [<VLAN ID (1‐4094)>]
Command mode: All
Vlan Configuration
2 Enabled
Chapter 2: Information Commands
97