RMON Event Information
164
G8264 Command Reference for ENOS 8.4
Table 71.
RMON Alarm Parameter Descriptions (continued)
Parameter
Description
rEvtIdx
Displays the rising alarm event index that is triggered when a rising
threshold is crossed.
fEvtIdx
Displays the falling alarm event index that is triggered when a
falling threshold is crossed.
OID
Displays the MIB Object Identifier for each alarm index.
Owner
Displays the owner of the alarm instance.
The following command displays RMON event information:
show rmon event
Command mode: All
RMON Event group configuration:
Index Type Last Sent Description
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
Index Owner
1 dan
The following table describes the RMON Event Information parameters.
Table 72.
RMON Event Parameter Descriptions
Parameter
Description
Index
Displays the index number that identifies each event instance.
Type
Displays the type of notification provided for this event, as
follows: none, log, trap or both.
Last sent
Displays the time that passed since the last switch reboot, when
the most recent event was triggered. This value is cleared when
the switch reboots.
Description
Displays a text description of the event.
Owner
Displays the owner of the alarm instance.