5Memory Deletion - Panasonic YC-300BZ3YHD Operating Instructions Manual

Settings
8.1.5 Memory deletion
If you would like to delete any welding conditions that you
programmed, follow the below steps.
1 Hold down the JOG dial, and while holding it down,
turn on the "POWRE" switch.
2 Turn the JOG dial until the screen on the right
appears.
3 Press the JOG dial.
4 Press the JOG dial.
Note
The screen on the right
appears on the digital
ammeter.
5 Turn the JOG dial to select a program number you
want to delete.
* Stored program numbers appear in series.
6 Press the JOG dial.
7 Turn the JOG dial and have "YES" displayed.
8 Press the JOG dial.
* To continue to delete the memories of other pro-
gram numbers: Go to no (4).
9 On completion of the desired deletion of program number memories, turn the power switch off.
34
Operation Set-value display
Then indication changes to
(When selecting "P01")
LCD display
Rescue Menu
YC-300B Series
1 Set Defaults?
No
2 Delete Page
P - -
2 Delete Page
P - -
Are you sure?
* * * *
2 Delete Page
P - -
OMCTT5621E18