Bosch Pack201HS Instruction Manual page 101

Pack201 | Maintenance | Section 6
6.2.2 Weekly Cleaning Procedure
These procedures are recommended after
40 hours of operation.
Proceed with daily cleaning tasks first.
Weekly Cleaning Procedure
Assembly
Sealing table (finseal
area)
Backstand
Discharge conveyor
© Bosch Packaging Technology, Inc.
All rights reserved 2012
Cleaning Tool
Damp cloth and
industrial soap or
cleaning solution
Damp cloth and
industrial soap or
cleaning solution
Damp cloth
Cleaning Procedure
Wipe down the sealing table.
Clean all metal rollers with an industrial soap
solution. Clean all rubber rollers with a mild soap
solution. Rinse and dry thoroughly.
Clean the conveyor belt.
EN | 4