ELECTRICAL
Kill Relay Installation (T-2)
1. Plug the kill relay into the wire harness (Fig. 1576).
2. Connect the negative battery cable to the battery.
Proximity Neutral Switch
Replacement (T-2)
Proximity Neutral Switch Removal (T-2)
1. Turn the engine off and remove the key from the
ignition.
2. Disconnect the negative battery cable from the
battery.
9
9-56
Fig 1576
PICT-1937
3. Unplug the harness from the proximity neutral switch
connector (Fig. 1577).
Fig 1577
4. Remove the cable tie securing the switch wires to
the frame (Fig. 1578).
Fig 1578
Floating Deck Mid-Size Service Manual
PICT-1938
PICT-1939