Hydraulic Pump Installation - Toro 30284 Service Manual

15. Transfer all 4 fi ttings to the new pump as well as
the mark indicating the location of one of the high
pressure hydraulic hoses (Fig. 0987). Torque each
fi tting as noted:
A A
D D
Fig 0987
A. High pressure hose (2) (torque: 34-38 ft-lbs. (46-
51.5 Nm))
B: High pressure hose marking
C: Charge hose fi tting (torque: 7-10 ft-lbs. (9.5-13.5
Nm) (brass), 15-21 ft-lbs. (20-28.4 Nm) (steel))
D: Drain fi tting (torque: 25-29 ft-lbs. (34-39 Nm))
Floating Deck Mid-Size Service Manual
HYDROSTATIC DRIVE SYSTEM

Hydraulic Pump Installation

1. Position the pump into the frame so that the pump
A A
B B
C C
PICT-0433a
2. Apply thread locking compound to the 2 control shaft
shaft is inserted into the control shaft (Fig. 0988).
Fig 0988
set screws (Fig. 0989).
Fig 0989
PICT-0431
6
PICT-0435a
6-15