ELECTRICAL
4. Plug the wire harness connector and terminal into
the ignition switch (Fig. 1541).
5. Position the cover bracket onto the control panel
(Fig. 1542).
9
9-46
Fig 1541
PICT-1872
Fig 1542
PICT-1848
6. Install 2 screws securing the control panel cover
bracket to the front side of the control panel (Fig.
1543).
Fig 1543
7. Position the manual tube to the cover bracket. Install
2 screws securing the manual tube assembly to the
control panel and control bracket (Fig. 1544).
Fig 1544
Floating Deck Mid-Size Service Manual
PICT-1847
PICT-1839