4. Begin threading the set screw into the driven pulley
hub (Fig. 1086).
Fig 1086
5. Slide the driven pulley onto the transmission drive
shaft (Fig. 1087).
Fig 1087
Floating Deck Mid-Size Service Manual
6. Tighten the set screw securing the transmission
driven pulley to the transmission driveshaft (Fig.
1088).
PICT-1518
7. Install a retaining ring onto the end of the transmis-
sion drive shaft (Fig. 1089).
PICT-1571
GEAR DRIVE
Fig 1088
PICT-1511
Fig 1089
PICT-1510
7
7-11