Seriee Dtmf (Message Type L) - Bosch Conettix D6600 Manual

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 3.0 Computer Communication
Protocols
.
Table 75: Scancom 4-24-1, 5-24-1, 6-24-1 - Available Upon Request (Message Type h) Printer
Output
Characters
SCN
Lxx:
Gxx

3.2.20 Seriee DTMF (Message Type l)

Seriee DTMF SIA Mode Description
Example
<LF><CRC><l><sequence#><receiver#><line#>[#aaaa|*data]<CR>
Table 76: Seriee DTMF (Message Type l) Byte Description
Title
LF
CRC
Message Type
sequence#
receiver#
line#
(Line/Group #)
account #
*
Data
Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
Description
Scancom.
Line number.
Grouped line numbers.
Description
Standard line feed character.
Cyclical redundancy check number.
l (lowercase L).
The message sequence number. The valid sequence number range is 0001
to 9999.
The receiver gateway that sent the message. Valid digits are 01 to 99 for
D6600/D6100/D6100IPv6.
The line number of the line in the receiver gateway that sent the message.
Valid digits are 00 to 99. The receiver uses Line 0 (zero) for internal
messages.
The communicator's account number has four digits.
Data separator.
DTMF Seriee Data.
65