Fig. 8-5: Position Of The Housing Cover And The Mounting Screw; Fig. 8-6: Position Of The Slots For Extension Cards - Bosch Rexroth IPC 40.2 Project Planning Manual

IPC 40.2
DOK-SUPPL*-IPC*40.2***-PR02-EN-P
Retaining screws
Rear covering plate
Fig. 8-5: Position of the housing cover and the mounting screw
5. The cover closing the air gap must be removed.
6. Remove the fastening screws from the slot cover.
7. Place the extension card and fix it with the fastening screw.
ISA/PCI slot A1
PCI slot A2
Fig. 8-6: Position of the slots for extension cards
Maintenance and Installation
Extension board for 3 cards
PCI slot A3
Cover
8-7
Abdeckung.FH9
Slot cover
Erweiterung.FH9