Operating the service processor
4.5.3 Setting up PROGRAM LOAD FRAME PRESET1
In this example, you specify:
LOAD function 1 with the name AUTO (AUTO=Automatic Startup) for a
●
POWER ON IPL
Device number of the IPL device to be used for a POWER ON IPL (currently A108)
●
Automatic IPL after a POWER ON
●
The LOAD FRAME should always be displayed as PROGRAM LOAD FRAME:
●
DETAIL-1.
Requirement
You have opened the SVP window and set up the connection to the SVP console.
The MODE SELECTION FRAME is displayed on the screen (see
Invoke the AUXILIARY FRAME: LOAD PRESET1 screen
Enter
Ê
or
enter the
Ê
The AUXILIARY FRAME: MENU screen is displayed (see
Enter
Ê
U41859-J-Z126-2-76
in the FUNCTION=> field and then press the [ENTER] key,
AU
command in line 24 and press the [ENTER] key.
FR AU
in the SELECTION=> field. Press the [ENTER] key.
5
Examples of SVP operation
page
55).
page
56).
59