Mounting The Handlebar; Handlebar - Adjust Fixture (Inclination); Handlebar - Dismounting / Mounting - GE eBike III basic Series Service Manual

M H
ountIng tHe andleBar
H - a
andleBar djust fIxture
1. Use an allen key to adjust the 2 screws.
2. Open the handlebar lever.
3. Start with a quarter turn clockwise for both screws.
4. Close the lever and check if the handlebar is secure.
5. The force of the lever can be adjusted by turning the
screw inside the lever.
6. Open the handlebar lever.
7. Turn the screw clockwise (a quarter turn) using a flat
screwdriver.
8. Close the lever and check if the handlebar is secure.
H - d
andleBar IsMountIng
1. Open the handlebar lever and turn the handlebar
downwards.
2. Remove the allen screw from the lever.
2018111-336 Rev. B
( )
InClInatIon
/
MountIng
eBike III basic / comfort - 37 -