Maintenance 5. Firmware Update
(8) Firmware and data file registration starts. It takes several minutes to complete.
NOTE
(9) The following dialog appears when registration is completed. Click the <Next>
(10) The following dialog appears after the Controller reboot. Click the <Finish> button.
The firmware upgrade is completed.
Start EPSON RC+ 6.0 and restore the Controller settings.
For details of restoring the operating system, refer to Maintenance 4. Backup and Restore.
144
Do not unplug the USB cable during transfer or turn OFF the Controller or the
development PC.
Do not power off the Controller during the registration process.
button to reboot the Controller.
RC620 Rev.8