Setup & Operation 14. Option : Teach Pendant TP1
14.4 AUTO Mode
Switch the mode selector key switch to "Auto" to enter the AUTO mode.
AUTO mode is used for the automatic operation (executing programs) in the field running
and state reference of the robot system.
Note, however, that the program cluster cannot be executed.
AUTO mode
Switch the mode selector key switch to "Auto" to display the [Print] screen. Follow the
description on the screen and press the <F4> key to display the [Main Menu] screen.
Menus with "..." at the end have following procedures after selecting the menu and cannot
TIP
be executed only by pressing the <OK> key.
108
Print Panel
I/O Monitor
Memory I/O Monitor
Task Monitor
System History
Controller Statuses
preservation
Date / Time
Brightness / Contrast
Language
Error
13.4.1 Program Command Display
13.4.2 I/O Monitor
13.4.3 Memory I/O monitor
13.4.4 Task Monitor
13.4.5 System History
13.4.6 Controller Statuses Preservation
13.4.7 Date / Time
13.4.8 Brightness / Contrast
13.4.9 Language
13.4.10 Error
NAME
: Screen name
: Reference section
RC620 Rev.8