Chipset Setup Menu; Table B-7 Ami Bios Chipset Menu - GE VMIVME-7807 Series Hardware Reference Manual

B.7 Chipset Setup Menu
65 VMIVME-7807/VME-7807RC Hardware Reference Manual
Select the various options for chipsets located in the system (for example, the CPU
configuration and configurations for the North and South Bridge). The settings
for the chipsets are processor dependent and care must be used when changing
settings from the defaults set at the factory. Below is a sample of the Chipset Setup
screen; the actual options on your system may vary.
NOTE
Changes in this screen can cause the system to malfunction. If
problems are noted after changes have been made, reboot the
system and access the BIOS. From the Exit menu select '
Failsafe Defaults
prevents access to the BIOS screens, refer to To Clear the CMOS
Password: on page 64 for instructions on clearing the CMOS.
Table B-7 AMI BIOS Chipset Menu
Main Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below section
may cause system to malfunction.
NorthBridge Configuration
SouthBridge Configuration
CPCI (HINT HB6) Bridge Configuration
Lan (8254EB) Port Routing Options
002.53 (C) Copyright 1985‐2002, American Megatrends, Inc.
NOTE
Default Settings - Chipset
ANALOG
' and reboot the system. If the system failure
BIOS SETUP UTILITY
PCIPnP Boot Security
Northbridge
Load
Chipset Exit
NorthBridge chipset
Configuration options.
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Force Video Output to