Table 1-1 Vmivme-7807/Vme-7807Rc Connectors And Switches; Table 1-2 Battery Enable (User Configurable) - Header (E3); Table 1-3 Vme System Controller (User Configurable) - Switch (S1) - GE VMIVME-7807 Series Hardware Reference Manual

18 VMIVME-7807/VME-7807RC Hardware Reference Manual

Table 1-1 VMIVME-7807/VME-7807RC Connectors and Switches

Connector Function
P1 VME interface connector
P2 USB 2.0, Serial ATA, digital video, IDE, COM2, 3 and 4, optional Gigabit
Ethernet
P0 VITA 31.1 Interface connector (optional)
P3 CompactFlash socket
P4 SODIMM socket
J16 and J17 USB ports
J10 Mouse/Keyboard PS/2 Type connector
J9 ITP connector (on the solder side of the board)
J15 10/100 Mbit RJ45 connector
J18 Gigabit Ethernet connector (optional)
J11, J12 and J13 PMC Site connectors
J22 Serial port connector (COM1)
J19 SVGA connector
J21 GE PCI expansion connector (PMC237CM1/V)
B1 Battery
Header Function
E3 CMOS header
Switches Function
S1 System Controller
S2 CMOS clear switch/BIOS Boot Mode
S4 Reset switch (Front Panel)
S6 Map Universe II to I/O space
S7 VME SYSRESET
S8 Not Used

Table 1-2 Battery Enable (User Configurable) - Header (E3)

Select
Battery Enabled
Battery Disabled

Table 1-3 VME System Controller (User Configurable) - Switch (S1)

Position State
1-4 Off
1-4 On
2-3 Off
2-3 On
Jumper Position
On
Off
Function
Normal Operation
Enables system or non-system controller (any slot)
Force system controller (any slot)
Force system or non-system controller (any slot)