User Management Operations - GE moisture.IQ User Manual

Chapter 6. Setting Up Communications

6.7 User Management Operations

User Management
The option allows you to set up and control access to the moisture.IQ for Web Server and VNC users
(see previous sections). Tap the button for the designated communication option to enter parameters. to use this option,
proceed as follows:
1. From the Configuration Menu screen (see Figure 52 on page 57), tap the
Log In screen (see Figure 70 on page 77).
User
2. Tap the button and select either
Password
3. Tap the
enter your password.
Log In
4. Tap the
button to open the Remote User Management screen (see Figure 71 on page 78).
5. To add a new user (up to three total) tap the
User
complete the
Return
the button.
6. To Set User Access, tap the
Remove Change Password
and
7. Use the two buttons at the bottom of the screen (
the selected user. Buttons highlighted in blue indicate that the user has access to those operations.
8. When you are finished, tap the
82
Admin
text box and use the keypad to enter your assigned password. Then, tap the
Password Confirm Password
, and
User
button and select the desired user from the drop-down list. Then, use the
buttons to configure this user account as desired.
Return
button twice to return to the Configuration Menu.
Operator
or from the drop-down list.
Add User
button in the top right corner of the screen. Then,
text boxes. When finished, tap the Check button and then
Change Settings and Remote Access
User Management
button to open the
Check
) to set the permissions for
moisture.IQ User's Guide
button to