Appendix C.
C.1 Updating the Chassis Firmware
1. Power on the moisture.IQ.
2. Load the updated firmware into the
3. Plug the USB flash drive (with the software update) into the moisture.IQ (see Figure 84 for Rack/Bench/Panel
Mount, Figure 85 for Weatherproof/Explosion-Proof).
moisture.IQ User's Guide
Updating the moisture.IQ Firmware
UPDATE
Figure 84: USB Flash Drive Plugged into Rear of Chassis
Figure 85: USB Flash Drive Plugged into Chassis Inside the Door
folder on the USB flash drive.
Appendix C. Updating the moisture.IQ Firmware
115