Audio Alarm; Name; Signal Ranges; Threshold - Bosch DINION IP 5000 MP Software Manual

74 en | Alarm
10.3

Audio Alarm

Alarms can be generated based on audio signals. Configure
signal strengths and frequency ranges so that false alarms, for
example, machine noise or background noise, are avoided.
Set up normal audio transmission before configuring the audio
alarm.
10.3.1 Audio alarm
Select On for the device to generate audio alarms.
10.3.2

Name

The name makes it easier to identify the alarm in extensive video
monitoring systems, for example with the Bosch Video Client
and the Bosch Video Management System. Enter a unique and
clear name here.
10.3.3

Signal Ranges

Exclude particular signal ranges in order to avoid false alarms.
For this reason the total signal is divided into 13 tonal ranges
(mel scale). Check or uncheck the boxes below the graphic to
include or exclude individual ranges.
10.3.4

Threshold

Set up the threshold on the basis of the signal visible in the
graphic Set the threshold using the slide control or,
alternatively, move the white line directly in the graphic using
the mouse.
10.3.5

Sensitivity

Use this setting to adapt the sensitivity to the sound
environment and effectively suppress individual signal peaks. A
high value represents a high level of sensitivity.
2015.04 | v1.592 | AM18-Q0678
Camera Browser
Interface
Bosch Security Systems