Image Posting; Jpeg Posting - Bosch DINION IP 5000 MP Software Manual

Camera Browser
Interface
13.6

Image Posting

A target account must first be defined to use JPEG posting and
for the export of recordings.
13.6.1

JPEG posting

Save individual JPEG images on an FTP server at specific
intervals.
Image size
Select the size of the JPEG images that are to be sent from the
camera. JPEG resolution corresponds to the highest setting
from the two data streams.
File name
Select how file names are created for the individual images that
are transmitted.
–
–
–
Posting interval
Enter the interval in seconds at which the images are sent to an
FTP server. Enter zero for no images to be sent.
Target
Select the target account for JPEG posting.
Bosch Security Systems
Overwrite: The same file name is always used and any
existing file will be overwritten by the current file.
Increment: A number from 000 to 255 is added to the file
name and automatically incremented by 1. When it reaches
255, it starts again from 000.
Date/time suffix: The date and time are automatically
added to the file name. When setting this parameter,
ensure that the date and time of the device are always set
correctly. For eample, the file snap011005_114530.jpg was
stored on October 1, 2005 at 11.45 and 30 seconds.
Network | en
2015.04 | v1.592 | AM18-Q0678
101