Decoder; Ssl Encryption; Auto-Connect; Audio - Bosch DINION IP 5000 MP Software Manual

72 en | Alarm
10.1.9

Decoder

If a split image is set for the selected video output, select a
decoder to display the alarm image. The decoder selected
determines the position in the split image.
10.1.10

SSL encryption

SSL encryption protects data used for establishing a
connection, such as the password. By selecting On, only
encrypted ports are available for the Remote port parameter.
SSL encryption must be activated and configured on both sides
of a connection.
The appropriate certificates must also have been uploaded.
(Certificates can be uploaded on the Maintenance page.)
Configure and activate encryption for media data (such as video,
metadata or audio when available) on the Encryption page
(encryption is only available if the appropriate license is
installed).
10.1.11

Auto-connect

Select On to automatically re-establish a connection to one of
the previously specified IP addresses after each reboot,
connection breakdown, or network failure.
10.1.12

Audio

Select On to transmit the audio stream with an alarm
connection.
2015.04 | v1.592 | AM18-Q0678
Camera Browser
Interface
Bosch Security Systems