Date/Time - Bosch DINION IP 5000 MP Software Manual

24 en | Basic Mode
–
Define and change a separate password for each level. Enter the
password (19 characters maximum; no special characters) for
the selected level.
Re-enter the new password to ensure that there are no typing
mistakes.
4.2

Date/Time

If there are multiple devices operating in the system or network,
it is important to synchronize their internal clocks. For example,
it is only possible to identify and correctly evaluate simultaneous
recordings when all devices are operating on the same time.
Device time, date and time zone are shown.
4
Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
The unit can receive the time signal from a time server using
various time server protocols and then use it to set the internal
clock. The device polls the time signal automatically once every
minute.
Enter the IP address of a time server.
Select the protocol that is supported by the selected time
server. It is recommended to select the SNTP server protocol.
This protocol provides high accuracy and is required for special
applications and future function extensions.
Select Time server if the server uses the RFC 868 protocol.
2015.04 | v1.592 | AM18-Q0678
live is the lowest authorization level. At this level you can
only view the live video image and switch between the
different live image displays.
Click Sync to PC to apply the system time from your
computer to the device.
Camera Browser
Interface
Bosch Security Systems