Installation - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Interpretation Devices

33.3 Installation

Install the interpreter desk on a flat surface or in a recess
(refer to figure 33.5). When you install the interpreter
desk in a flat surface, use the template (refer to figure
33.6).
Note
When you install the interpreter desk in a
recess, make sure that the interpreter can
connect the headphones or the headset.
table 33. 1 : Physical characteristics
Dimensions (h x w x d):
80 x 330 x 160 mm
Weight:
1.3 kg
When you attach the interpreter desk to a flat surface,
put screws with a length of 10 mm in the screw holes
(refer to figure 33.4, no. 28). The distance between the
centres of the screw holes is 100 mm.
figure 33.6: Template (refer to the CD-ROM that is supplied with the system for a *.dwg file)
Bosch Security Systems | 2007-02 | 9922 141 70525
figure 33.5: Installation
63.8+0.2
19.5+0. 1
328
+0. 1
-0.2
en | 207
1.5 mm