DCN Next Generation | Installation and User Instructions | Flush-mounted Devices
21.5
Installation
Install the dual delegate interface on a flat surface (refer
to figure 21.10). Use the lid of the dual delegate
interface to fix the positions of the DCN cables and the
cables of the audio inputs and audio outputs.
Note
The DCN-DDI Dual Delegate Interface is not a
flush-mounted device.
figure 21. 1 0: Installation
table 21.5: Physical characteristics
Dimensions (h x w x d):
x 100 x 35 mm
Weight:
580 g
Bosch Security Systems | 2007-02 | 9922 141 70525
21.6
External connections
21.6.1 DCN
Connect the dual delegate interface to the DCN with
the DCN cable. You can use the DCN socket to make a
loop-through with the dual delegate interface.
table 21.6: DCN connections
Number of connections:
1x DCN socket
1x DCN cable (2 m) with plug
Location:
Bottom side
Power consumption:
2.2 W (4.5 W)
Note
The power consumption of 4.5 W includes the
power consumption of all flush-mounted
devices that you can connect to the dual
delegate interface. These are:
•
DCN-FLSP
•
DCN-FMIC
•
DCN-FMICB
•
DCN-FPRIOB
•
DCN-FV
•
DCN-FVCRD
en | 175