Programming Authorization Code; Id Code For System Progamming - Panasonic DBS 824 Installation Manual

FFl ID Code For System Programmtng
Programming Authorization Code
ID Code For System Programming
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 7# (0000-9999)#
Description
This program assigns an ID code that can be dialed from a non-attendant
phone to enter the programming mode.
Non-attendant extensions enter the programming mode by dialing ##98 and
then the ID Code entered in this address.
Programming
To assign the ID code for system programming . . .
.
Notes
FFl 7# (OOOO-9999)#
f.
4-Digit ID Code
(Default=!EW)
To reset the ID code to the default value . . .
FFl 7# CONF ON/OFF
t .
Entering the Programming Mode. Only one non-attendant extension can be
a programming extension at a particular time.
Issued 3/l /95
DBS 824-l O-400 1-121