Kickstarter; Seat - Yamaha AG200FED 2012 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Kickstarter

1
2
3
4
1. Kickstarter
5
To start the engine, fold out the kick-
starter lever, move it down lightly with
6
your foot until the gears engage, and
then push it down smoothly but force-
7 fully. This model is equipped with a pri-
mary kickstarter, allowing the engine to
be started in any gear if the clutch is
8
disengaged. However, shifting the
transmission into the neutral position
9
before starting is recommended.
EAU13650

Seat

To remove the seat
1. Remove panels A and B. (See
page 7-7.)
2. Remove the bolts and pull the seat
off.
1
1. Bolt
EAU14001
1. Bolt
1
To install the seat
1. Insert the projections on the front
1. Projection
2. Seat holder
2. Place the seat in the original posi-
4-8
1
of the seat into the seat holders as
shown.
1
2