Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
page 7-34.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
turning it counterclockwise.
1
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out of the socket.
Periodic maintenance and adjustment
EAU46405
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the headlight unit.
7-36
Brake/tail light
This model is equipped with an LED-
type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
EAU70540
7