Replacing The Auxiliary Light Bulb - Yamaha PG-1 Owner's Manual

1. Screw
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1
2
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
1. Headlight bulb holder
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the bulb cover, and then
connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Periodic maintenance and adjustment
1
7-29
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
moving the screws.
1
1. Screw
1. Screw
EAU33417
7
1