Replacing An Auxiliary Light Bulb; Replacing The Tail/Brake Light Bulb - Yamaha Fazer 8 2014 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove panel A (if replacing the
left auxiliary light bulb) or panel B
(if replacing the right auxiliary light
bulb). (See page 6-8.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
6
1
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
EAU32835
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the panel.
6-38
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-18.)
2. Remove the tail/brake light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the passenger seat.
EAU24116
1