1
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
then connect the coupler.
6. Install the headlight unit as shown,
and then install the washer and
bolt on each side.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
2
Periodic maintenance and adjustment
7-35
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
page 7-34.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
turning it counterclockwise.
1
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out of the socket.
EAU46405
7