Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha MT09 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
3
6
3
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
EAU58010
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
4
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars and nuts.
2
Replacing an auxiliary light
bulb
1
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit side
1. Bolt
6-37
covers by removing the bolts on
each side.
1
EAU58021
1