D-Mode (Drive Mode) - Yamaha MT09 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
If a problem is detected in the immobi-
lizer system circuits, the immobilizer
system indicator light will flash and the
display will indicate an error code.
TIP
3
If the display indicates error code 52,
this could be caused by transponder
interference. If this error code appears,
try the following.
1. Use the code re-registering key to
start the engine.
TIP
Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer
key on the same key ring! Immobilizer
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.
2. If the engine starts, turn it off and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
NOTICE
If the display indicates an error co-
de, the vehicle should be checked as
soon as possible in order to avoid
engine damage.
3-13

D-mode (drive mode)

D-mode is an electronically controlled
engine performance system with three
ECA11591
mode selections ("STD", "A", and "B").
Push the drive mode switch "MODE"
to switch between modes. (See page
3-15 for an explanation of the drive
mode switch.)
1. Drive mode switch "MODE"
TIP
Before using D-mode, make sure you
understand its operation along with the
operation of the drive mode switch.
Mode "STD"
Mode "STD" is suitable for various rid-
ing conditions.
EAU47634
1