Danfoss PAHT G 6.3 High Pressure Pumps Manuals

Manuals and User Guides for Danfoss PAHT G 6.3 High Pressure Pumps. We have 1 Danfoss PAHT G 6.3 High Pressure Pumps manual available for free PDF download: Operation Manual

Danfoss PAHT G 6.3 Operation Manual

Danfoss PAHT G 6.3 Operation Manual (86 pages)

Brand: Danfoss | Category: Water Pump | Size: 12.44 MB

Table of Contents

Data Sheet Product Type

2
- Table of Contents
  2
- Validity
  4
- Introduction
  5
- Symbols
  5
- General
  5
- Manufacturer and Customer Service Address
  6
- Country Specific Information
  6
- United Kingdom
  6
- Safety
  6
- General Information
  6
- Preferred System Design
  6
- Application Range
  7
- Space Requirement
  7
- Dimension Drawings
  7
- Noise and Vibration
  7
- Approved Applications and Operational Limits for the Pumps
  7
- Commissioning and Servicing the Unit
  7
- Technical Data
  7
- Electric Motor Data
  7
- Adhere to the Following Important Points
  7
- In Case of Doubt
  7
- Filtration
  8
- Properties of Water
  8
- Air Bubbles
  8
- Arrival Inspection, Transportation, Handling, Lifting and Storage
  8
- Arrival Inspection
  8
- Warning
  8
- General Safety Information
  8
- Transport and Handling
  8
- Chemicals
  8
- Return to Supplier
  9
- Storage
  9
- Electrical Data
  10
- Local Regulations
  10
- Important Dimensions
  10
- Fluid Temperature
  10
- Installation and Commissioning
  10
- Cleanliness
  10
- Pre Mounting Checklist, Based on Danfoss Preferred System Designs
  11
- Lifting and Positioning
  11
- Mount the Different Equipment
  11
- Electrics
  11
- Instrumentation
  11
- Connections
  11
- Open System
  12
- Instruct Operator and Maintenance Personnel
  12
- Closed System (Not Applicable for PAHT G 256-308)
  12
- Check the Filter Condition
  12
- Commissioning
  12
- Bleed and Remove Air from the Pump
  12
- Verify Setting of Safety/Relief Valves
  12
- Ensure Free Flow
  12
- Verify Direction of Rotation
  12
- Maintenance and Service of the Pump Unit
  13
- Shut down of the System
  13
- Service and Inspection Interval for the Pump
  13
- What to Listen and Look for
  13
- General Safety Information
  13
- Operation of Motor Pump Unit
  13
- Disassembling and Assembling the Pump Unit
  14
- Assembling the Pump Unit
  14
- Procedure for Mounting the Pump Back Onto Electric Motor
  14
- Getting the Pump Unit Back into Operation
  14
- Storage of the Pump
  14
- Scrapping Criteria
  15
- Responsibility
  15
- Electrical Failure
  15
- Mechanical Failure
  15
- Operational Conditions Which Can Cause Pump Failures
  15
- General Safety Information
  15
- Troubleshooting and Scrapping Criteria
  15
- Appendices
  17
- Electric Motor Manual (180R9230)
  18
- Right and Wrong - Trouble Shooting Guide for Water Hydraulic Systems (180R9042)
  18
Data Sheet Product Typedata Sheet

20
- Application Examples
  21
- Benefits
  21
- Paht G 2-12.5
  22
- Technical Data
  22
- Paht G 20-32
  23
- Paht G 50-90
  24
- Paht G 256-308
  25
- Flow
  26
- PAHT G 2-6.3 Typical Flow Curves at Max Pressure
  26
- PAHT G 10-12.5 Typical Flow Curves at Max Pressure
  27
- PAHT G 20-32 Typical Flow Curves at Max Pressure
  28
- PAHT G 50-90 Typical Flow Curves at Max Pressure
  29
- PAHT G 256-308 Typical Flow Curves at Max Pressure
  30
- Motor Requirements
  31
- Filtration
  32
- Installation
  32
- Noise
  32
- Open-System Design
  33
- Closed-System Design (Not Applicable for PAHT G 256-308)
  34
- Paht G 10-12.5
  35
- Paht G 20-32
  36
- Paht G 50-90
  36
- Paht G 256-308
  39
- Service
  40
Data Sheet Product Typeinstruction

44
- Closed-System Design
  45
- System Design
  45
- Open-System Design
  46
- General Comments on
  47
- General Guidelines for Calculation of Pressure Losses
  47
- Building up the Pump Unit
  48
- Direction of Rotation
  48
- Mounting
  48
- Orientation
  48
- Connections
  49
- Protection from too High Pressures
  49
- Disconnection
  50
- Dry Running
  50
- Initial Start-Up
  50
- Operation
  50
- Pressure
  50
- Storage
  50
- Temperature
  50
- Water Hydraulic Systems, Water Recirculated
  50
- Water Quality
  50
- General Information
  51
- How to Inspect the Pump
  51
- Inspection of Pump Parts
  51
- Open-Ended Systems with Direct Water Supply
  51
- Open-Ended Systems with Water Supply from Tank
  51
- Recommended Service Intervals
  51
Data Sheet Product Typeguideline

70
- Trouble Shooting Fish Bone Chart
  71
- No Flow/No Pressure
  72
- Reduced Flow/Reduced Pressure
  73
- High Torque on Electric Motor
  74
- Noise from Pump
  75
- Noise from Installation
  76
- Typical Signs of Wear
  77
- Valve Plate
  77
- Port Plate
  78
- Swash Plate
  78

Advertisement

Advertisement

Related Products

Danfoss Categories

Controller DC Drives Thermostat Control Unit Water Pump

More Danfoss Manuals