Advertisement
3.) Now at the same time, using your other
hand, simply push in the pivoting head (it
says "push" on the unit). Push in and set
the head to the setting that is most
comfortable to you (the unit comes
prepackaged at the first setting, but you
can adjust your trimmer to any one of four
other settings.) It will take some time to
get used to your own personal setting, so
try each one until you find a setting that
works for you. As you try each setting, you
will notice how comfortable this unit makes
trimming your nose and ear hairs.
4.) If you do not wish to use the pivoting
head feature, just leave the trimmer as it was
when it was removed from the packaging.
TO TRIM YOUR NOSE HAIR
Turn unit on. Gently insert
trimmer head into nostril.
Gently move trimmer in and
out of the nostril using a
circular
motion
rotating the trimmer around
the nostril opening. Avoid
inserting the trimmer more
than 1" to ensure safe trimming.
TO TRIM YOUR EAR HAIR
Turn unit on. Gently insert
trimmer head no more than
1" into outer ear canal.
Gently move trimmer in and
out of the outer ear and
rotate trimmer in a circular
motion around the ear canal
opening. Guide the trimmer
around the outer surface of ear to trim
protruding hairs. Never insert trimmer more
than 1" into ear canal.
while
TO CLEAN YOUR TRIMMER
Make sure trimmer is off.
1.
To
remove
housing to clean your
trimmer turn top
counterclockwise
and remove from
body.
Rinse cutter only under water.
Shake dry. Make sure that cutter is not
pushed to either side. Cutter should
remain centered as illustrated below.
Reassemble top housing onto body and
turn clockwise until arrows line up.
top
Acceptable
Advertisement
