Brother MFC-250C Quick Setup Manual page 2

Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct USB cable.
• To ensure safe operation the supplied plug
must be inserted only into a standard power
outlet that is properly grounded through the
standard electrical wiring. Non grounded
equipment may cause an electrical shock
hazard, and may cause excessive electrical
noise radiation.
USB cable
Please make sure you use a USB 2.0 cable
(Type A/B) that is no more than 2 metres long.
2
Load plain A4 paper
a
Pull the paper tray
machine.
b
Open the paper tray cover a.
1
2
a completely out of the
1
c
With both hands, gently press and slide the
paper side guides
b
guide to fit the paper size.
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
Important
Do not push the paper in too far.
a
and then the paper length
c on the
a
and paper length guide
1
3
2
3
b