We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Required
" (14 mm) open-end
wrench (for leveling leg
locknuts)
Location Requirements
Your laundry tower can be installed freestanding or between your
washer and dryer. Proper installation is your responsibility.
Installation Clearances
The location must be large enough to allow the drawers to be
fully opened.
When you are installing your laundry tower between or next to
your washer and dryer, a spacing of 1" (2.5 cm) on the sides
of the laundry tower is recommended to reduce noise
transfer.
Additional spacing should be considered for ease of
installation and servicing.
2
LAUNDRY TOWER SAFETY
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Measuring tape
Level
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Laundry Tower Dimensions
38
" *
(96.8 cm)
27
" **
(70.1 cm)
45
"
(115.1 cm)
*Includes leveling feet
**Includes drawer front
10"
(25.4 cm)
13
"
(34.3 cm)