Tuner Output - Peavey Mini MEGA Operating Instructions Manual

Rear Panel cont.
XLR DIRECT OUTPUT
24
This XLR output allows the signal from the mini MEGA to be connected directly to a mixing console.
TRS BALANCED OUTPUT
25
Another output option for the miniMEGA is the TRS output connection. A 1/4" balanced TRS cable can be con-
nected directly into a rack-mount FX processor or outboard recording device.
PRE/POST SELECTOR BUTTON
26
This button allows you to select two funtions for the Direct Interface. In the up position, the button is in the Pre
mode. In this position, the bass signal bypasses the EQ and processing of the amplifier and travels directly to the
rack-mount FX processor or recording device. When the button is depressed, the amp is in Post; the signal goes
through the miniMEGA's preamp and processors before traveling to the rack-mount FX processor or recording
device.
PAD BUTTON
27
The PAD button helps prevent the signal from clipping at the soundboard or recorder, by reducing the amount of
signal level sent from the amplifier. Press this button if the signal to the soundboard is clipping.
GROUND LIFT BUTTON
28
In the case of humming noises coming from the Direct Interface, this button can be pressed in order to remove
the ground loop.
EFFECTS LOOP SEND
29
1/4" output jack for supplying signals to external low-level effects or signal processing equipment.
EFFECTS LOOP RETURN
30
1/4" input for returning signals from external low-level effects or signal processing equipment. This is a switching
jack. Inserting a plug into this jack will break the signal path until it is returned via the EFFECTS LOOP SEND
jack. The Effects Loop is footswitchable, but the effects loop may be bypassed without the footswitch. First, hold
down the CRUNCH button, and then press the HI MID NARROW Q enable button.

TUNER OUTPUT

31
A 1/4" instrument cable can be run from the tuner jack into a tuner. Even when the Mute Button (17) is engaged,
the instrument signal will continue to run into the external tuner.
MIDI FOOTSWITCH JACK
32
The optional footswitch (part number_________) plugs into this jack. The footswitch controls Crunch, Com-
pressor, Kosmos, FX Loop, and Mute functions.