Section 1 - Introduction The MaxTech FHX-8100 is an 8-port hub compliant with the IEEE 802.3u 100Base-TX fast ethernet standard. The eight RJ-45 ports connect workstations or other devices together on a 100Base-TX fast ethernet network using twisted- pair cable. An additional crossover port connects this hub to a second hub using a standard (straight-through) network cable for easy network expansion.
Section 3 - LED indicators The front-panel LEDs (see Figure 2) show the status of the hub and the network connections. Function POWER UTILIZATION Green Yellow COLLISION Green Yellow PARTITION (1 through 8) LINK/TRAFFIC (1 through 8) Blink Section 4 - Troubleshooting Symptom: Partition indicator lights up.
The maximum length from node to node = 367m - S(Repeater Equivalent Length @ CAT-5), or 367m - S(REL@5). The FHX-8100 has an inherent repeater delay of 80BT or 72 meters (REL@5). Taking a daisy-chain of two hubs for an example, the maximum cable length from node to node is: 367m - (2 x 72m) = 223m.
it in a sturdy corrugated box. Be sure to include your name, address, day-time telephone number, RMA number, and a brief description of the problem (also enclose a check for out- of-warranty repair). Enclose your check or Postal Money Order for $7.50 to cover the cost of return shipping/handling.