Crypto F200 User Manual page 10

Step 7:
For the example insert:
VPI = 8
VCI = 35
Click Apply.
Step 8:
For Encapsulation Mode select the connection
protocol:
PPP over ATM VCMUX (RFC2364)
Click Apply
Click on the General tab
Step 9:
Under Line Status, the indication ADSL Connection
Established, indicates that the connection /
synchronization with the ADSL line has been done
with success.
Note: 1 to 2 minutes are required after you make
the above configurations, in order for the F200 to
be synchronized with the ADSL line.
Step 10:
To see information regarding the connection,
click the Physical Layer Statistics tab,
and click OK.
10