Nut / Bridge - Warwick Teambuilt Pro Series Manual

3) Nut / Bridge

Nut:
Just A Nut III is the standard on Warwick Teambuilt Pro Series bass guitars, manufactured using high-
tech material with the best tonal characteristics, fine adjustability and stability.
Use the included 1.5 mm Allen wrench to adjust the string's height at the nut.
TIP:
Press down on the string at the 3rd fret.
Bridge:
The Warwick 3-D Bridge features additional adjustments on top of the floating bridge height adjustment:
Intonation, string spacing as well as individual string saddle height adjustment to accommodate the fingerboard's
radius.
First loosen the locking screw (1) with the included 2.5 mm Allen wrench, the bridge is now unlocked and can
be adjusted with the adjustment screws (2). To adjust the height of each individual string saddle as well as
adjusting the string spacing, loosen the locking screws (3) with the included 1.5 mm Allen wrench and now the
saddle is unlocked. The saddle can now be moved sideways to the left or right to obtain the desired string
spacing. In this step you can also adjust the height of each individual string saddle, and for that take the 1.5
mm wrench and adjust the adjustment screws (4). An ideal setup is the one where the strings follow the
fingerboard's radius. You can adjust the intonation screws (5) with a screwdriver. Turning the screws
clockwise will increase the string's length between bridge and nut; turning them counterclockwise will
decrease the string's length. Once the setup is concluded please tighten locking screws 1 and 3 to secure it.
Check the distance between the first fret and the
string. It shouldn't read more than 0.3 mm / 0.01",
which equals the thickness of a business card.
7