Nut / Bridge - Warwick All RockBass Manual

3) Nut / Bridge

Nut:
Just A Nut III is the standard on RockBass
characteristics, fine adjustability and stability.
Use the included 1.5 mm Allen wrench to adjust the string's height at the nut.
TIP:
Press down on the string at the 3rd fret.
Bridge:
The Warwick 3-D Bridge features additional adjustments on top of the floating bridge height adjustment: Intonation, string spacing as well
as individual string saddle height adjustment to accommodate the fingerboard's radius.
First loosen the locking screw (1) with the included 2.5 mm Allen wrench, the bridge is now unlocked and can be adjusted with the adjust-
ment screws (2). To adjust the height of each individual string saddle as well as adjusting the string spacing, loosen the locking screws (3)
with the included 1.5 mm Allen wrench and now the saddle is unlocked. The saddle can now be moved sideways to the left or right to
obtain the desired string spacing. In this step you can also adjust the height of each individual string saddle, and for that take the 1.5 mm
wrench and adjust the adjustment screws (4). An ideal setup is the one where the strings follow the fingerboard's radius. You can adjust the
intonation screws (5) with a screwdriver. Turning the screws clockwise will increase the string's length between bridge and nut; turning
them counterclockwise will decrease the string's length. Once the setup is concluded please tighten locking screws 1 and 3 to secure it.
® bass guitars since 2008, manufactured using high-tech material with the best tonal
3
Check the distance between the first fret and the string.
It shouldn't read more than 0.3 mm / 0.01", which equals
the thickness of a business card.
1
4
2
5
7